weberpral M

The standard through-coloured monocouche, the one most of the UK’s rendered housing is finished in — scraped or textured on site, in a wide colour range, and left as the final surface. Its declaration carries a 25-year reference service life and a small negative B1 for carbonation in use, which the reformulated weberpral E declaration does not.

Manufacturer page
Saint-Gobain Weber weberpral M

Carbon and evidence

Product Evidence

Evidence currently held for the Saint-Gobain Weber product record.

Saint-Gobain Weber

Recorded Carbon Result

0.17kgCO₂e/kg

A1–A3 Climate Change (total) per kilogramme of render as applied. There is no per-m² figure in this declaration — no coverage rate is stated — so multiply by the spread rate for the coat thickness actually specified. Net of 0.0591 biogenic against 0.229 fossil, the biogenic term coming from timber pallets rather than the render.

Indicator: GWP-total

weberpral M monocouche render (S-P-08211)

A1–A3 covers raw-material supply, transport to manufacture and manufacturing. It is product-stage information, not a whole-life result.

Environmental Product Declaration

EPD recorded
Coverage
Product family
Declared unit
1 kg
Programme
EPD International (The International EPD® System)
Registration
S-P-08211
Standard
EN 15804+A2, ISO 14025
Valid until
2028-02-23
Verification
Third-party verified

weberpral M coloured monocouche, manufactured at Weber's Telford plant.

Read the EPDSource: Climate Change (total / fossil / biogenic / land use change) rows of the results table

Carbon profile

kgCO2e per 1 kg · each bar starts at zero · local scale

A1-A3 product

0.17

A4-A5 site*

0.0175

B use

-0.00131

C end of life

0.00921

D reuse / recycling

0

adds carbon stores or removes EPD scenario* reuse/recycling potential (D)
* EPD transport and installation scenario, not this project's. Module D shows potential impacts or benefits from reuse, recovery or recycling after the product's assessed life. It is reported separately and never added to A-C. Do not compare bar lengths between materials. Each chart may use a different scale and declared unit.

Reported GWP Modules

Displayed as stored; modules are not added together here.

A1–A3

0.17 kgCO₂e

per 1 kg

A4*

0.0159 kgCO₂e

per 1 kg

A5*

0.00162 kgCO₂e

per 1 kg

B1

-0.00131 kgCO₂e

per 1 kg

C1

0 kgCO₂e

per 1 kg

C2

0.00364 kgCO₂e

per 1 kg

C3

0.00557 kgCO₂e

per 1 kg

C4

0 kgCO₂e

per 1 kg

D

0 kgCO₂e

per 1 kg

* A4/A5 are EPD scenarios, not project-specific results. Module D is outside the A–C system boundary and is not added to A–C. Module nomenclature follows BS EN 15978 / EN 15804. Declared values are suitable as inputs to a whole life carbon assessment under the RICS Professional Standard (2nd edition); this panel is not an assessment.

Upfront Carbon (A1–A5)*

0.188 kgCO₂e per 1 kg

A1–A3 0.17 + A4 0.0159 + A5 0.00162 · GWP-total (printed as Climate Change total), as declared

* Includes the EPD’s A4/A5 scenario assumptions, not project-specific transport or installation. This is the aggregation the proposed Part Z applies upfront limits to. The A1–A3 figure includes declared biogenic storage of -0.0591 kgCO₂e; Part Z aggregates upfront carbon excluding sequestered carbon, which is the assessor's adjustment to make.

Service Life — the B4 Replacement Input

25 years · EPD reference service life

The declaration states a 25-year reference service life.

≈3 installations over a 60-year building study period.

B4 (replacement) follows the building, not the product: an assessor multiplies replacement cycles by project quantities. This record supplies the service life and does not compute B4.

Sourced Product Claims

  • Small declared carbonation uptake in use (B1 = −0.00131 kgCO2e/kg)Third-party verifiedSource
  • Third-party verified EPD, valid to 2028-02-23Third-party verifiedSource

Evidence Sources

weberpral M monocouche render (S-P-08211)

EPD International (The International EPD® System)

Third-party verified

Comparison Status

This result should be displayed for information only and not ranked against another product.

  • • The EPD is not linked to an evidence source.

Design & Specification Notes

Qualitative notes for early design discussion. Not product-specific EPD evidence, and not a basis for numerical comparison.

The standard through-coloured monocouche, the one most of the UK’s rendered housing is finished in — scraped or textured on site, in a wide colour range, and left as the final surface.

Typical Uses

  • Facade cladding
  • Weather protection
  • External accents

Key Performance

Weather-resistant finish for facade exposure.

Specification Actions

  • Confirm the current EPD covers the selected product, finish and manufacturing route.
  • Calculate transport distances for primary materials.
  • Document material reuse or reclaimed content percentages.

Indicative Health & Indoor Air

low Risk
Evidence:Third-party verified

Specification

Range
weberpral
Finish
Through-coloured monocouche render
Service life
25 years
Country of manufacture
United Kingdom

Cookies — essential ones keep the site working; optional analytics help us improve it. No advertising cookies.