Trespa Meteon

Decorative high-pressure compact laminate (HPL) for ventilated rainscreen façades. A dense wood-based core under Trespa’s UV-stable Electron Beam Curing (EBC) surface gives colour-fast, weather-resistant panels for external walls, balconies and soffits, in a wide range of solids and woodgrains. Data for the 8 mm EDF grade.

Manufacturer page
Trespa Trespa Meteon

Carbon and evidence

Product Evidence

Evidence currently held for the Trespa product record.

Trespa

Recorded Carbon Result

14.5kgCO₂e/m²

A1–A3 GWP-total per m² of 8 mm panel, per EPD

A1–A3 covers raw-material supply, transport to manufacture and manufacturing. It is product-stage information, not a whole-life result.

Environmental Product Declaration

EPD recorded
Coverage
Representative product
Declared unit
1 m² finished panel, 8 mm (11.2 kg)
Programme
EPD International AB — The International EPD System
Registration
S-P-07213
Standard
EN 15804+A2
Valid until
2027-12-22
Verification
Third-party verified

Third-party verified by SGS Italia. Figure is for 8 mm Meteon EDF (weighted average of colours); thinner/thicker grades scale roughly with mass. A4/A5/B not declared. Manufactured in Weert (NL) on 100% renewable (wind) electricity.

Carbon profile

kgCO2e per 1 m² at 8 mm · each bar starts at zero · local scale

A1-A3 product

14.5

A4-A5 site*

not declared

B use

not declared

C end of life

22.4

D reuse / recycling

-15.1

End of life is the largest of the modules this EPD declares.

adds carbon stores or removes EPD scenario* reuse/recycling potential (D)
* EPD transport and installation scenario, not this project's. Not declared: site, use. Module D shows potential impacts or benefits from reuse, recovery or recycling after the product's assessed life. It is reported separately and never added to A-C. Do not compare bar lengths between materials. Each chart may use a different scale and declared unit.

Reported GWP Modules

Displayed as stored; modules are not added together here.

A1–A3

14.5 kgCO₂e

per 1 m² at 8 mm

C1

0.709 kgCO₂e

per 1 m² at 8 mm

C2

0.104 kgCO₂e

per 1 m² at 8 mm

C3

21.6 kgCO₂e

per 1 m² at 8 mm

C4

0 kgCO₂e

per 1 m² at 8 mm

D

-15.1 kgCO₂e

per 1 m² at 8 mm

* A4/A5 are EPD scenarios, not project-specific results. Module D is outside the A–C system boundary and is not added to A–C. Module nomenclature follows BS EN 15978 / EN 15804. Declared values are suitable as inputs to a whole life carbon assessment under the RICS Professional Standard (2nd edition); this panel is not an assessment.

Service Life — the B4 Replacement Input

50 years · EPD reference service life

≈2 installations over a 60-year building study period.

B4 (replacement) follows the building, not the product: an assessor multiplies replacement cycles by project quantities. This record supplies the service life and does not compute B4.

3 claims and 3 certifications are held in the staging record but not presented as product evidence because an exact public source has not yet been mapped.

Comparison Status

This result should be displayed for information only and not ranked against another product.

  • • The PCR and version are missing.
  • • The GWP indicator is missing.
  • • The carbon result is not linked to an evidence source.
  • • The EPD is not linked to an evidence source.

Evidence Gaps

  • 3 sustainability claims are withheld because exact public evidence is not mapped.
  • 3 certifications are withheld because exact public evidence is not mapped.

Design & Specification Notes

Qualitative notes for early design discussion. Not product-specific EPD evidence, and not a basis for numerical comparison.

Decorative high-pressure compact laminate (HPL) for ventilated rainscreen façades.

Typical Uses

  • Facade cladding
  • Weather protection
  • External accents

Key Performance

Weather-resistant finish for facade exposure.

Specification Actions

  • Confirm the current EPD covers the selected product, finish and manufacturing route.
  • Calculate transport distances for primary materials.
  • Document material reuse or reclaimed content percentages.

Indicative Health & Indoor Air

low Risk

Inert cured HPL panel; standard cutting-dust extraction when machining.

Evidence:Third-party verified

Specification

Range
Meteon EDF 8 mm
Collection
Meteon
Finish
HPL rainscreen panel
Thickness
6, 8, 10, 13mm
Service life
50 years

Cookies — essential ones keep the site working; optional analytics help us improve it. No advertising cookies.