Tobermore Fusion

Concrete block paving with a granite-aggregate face for a natural stone look and colour-fast, hard-wearing finish. Used for driveways, streetscapes and public realm, with permeable (Hydropave) options for SuDS. Data for the 80 mm Fusion range.

Manufacturer page
Tobermore Tobermore Fusion

Carbon and evidence

Product Evidence

Evidence currently held for the Tobermore product record.

Tobermore

Recorded Carbon Result

23.5kgCO₂e/m²

A1–A3 GWP-total per m² of paving, per EPD

A1–A3 covers raw-material supply, transport to manufacture and manufacturing. It is product-stage information, not a whole-life result.

Environmental Product Declaration

EPD recorded
Coverage
Representative product
Declared unit
1 m² of paving (50-year service life)
Programme
EPD Ireland — Irish Green Building Council (ECO Platform)
Registration
EPDIE-21-56
Standard
EN 15804+A2
Valid until
2027-03-23
Verification
Third-party verified

Externally (third-party) verified ECO Platform EPD; representative across the 80 mm Fusion sizes (within ±10%). B and most C modules not declared; no declared-unit mass stated, so figure is per m² only.

Carbon profile

kgCO2e per 1 m² of paving · each bar starts at zero · local scale

A1-A3 product

23.5

A4-A5 site*

10.7

B use

not declared

C end of life

0.384

D reuse / recycling

-2.26

adds carbon stores or removes EPD scenario* reuse/recycling potential (D)
* EPD transport and installation scenario, not this project's. Not declared: use. Module D shows potential impacts or benefits from reuse, recovery or recycling after the product's assessed life. It is reported separately and never added to A-C. Do not compare bar lengths between materials. Each chart may use a different scale and declared unit.

Reported GWP Modules

Displayed as stored; modules are not added together here.

A1–A3

23.5 kgCO₂e

per 1 m² of paving

A4*

9.63 kgCO₂e

per 1 m² of paving

A5*

1.08 kgCO₂e

per 1 m² of paving

C1

0 kgCO₂e

per 1 m² of paving

C2

0.384 kgCO₂e

per 1 m² of paving

C3

0 kgCO₂e

per 1 m² of paving

C4

0 kgCO₂e

per 1 m² of paving

D

-2.26 kgCO₂e

per 1 m² of paving

* A4/A5 are EPD scenarios, not project-specific results. Module D is outside the A–C system boundary and is not added to A–C. Module nomenclature follows BS EN 15978 / EN 15804. Declared values are suitable as inputs to a whole life carbon assessment under the RICS Professional Standard (2nd edition); this panel is not an assessment.

Upfront Carbon (A1–A5)*

34.2 kgCO₂e per 1 m² of paving

A1–A3 23.5 + A4 9.63 + A5 1.08 · as declared

* Includes the EPD’s A4/A5 scenario assumptions, not project-specific transport or installation. This is the aggregation the proposed Part Z applies upfront limits to.

Service Life — the B4 Replacement Input

50 years · EPD reference service life

≈2 installations over a 60-year building study period.

B4 (replacement) follows the building, not the product: an assessor multiplies replacement cycles by project quantities. This record supplies the service life and does not compute B4.

2 claims and 1 certification are held in the staging record but not presented as product evidence because an exact public source has not yet been mapped.

Comparison Status

This result should be displayed for information only and not ranked against another product.

  • • The PCR and version are missing.
  • • The GWP indicator is missing.
  • • The carbon result is not linked to an evidence source.
  • • The EPD is not linked to an evidence source.

Evidence Gaps

  • 2 sustainability claims are withheld because exact public evidence is not mapped.
  • 1 certification is withheld because exact public evidence is not mapped.

Design & Specification Notes

Qualitative notes for early design discussion. Not product-specific EPD evidence, and not a basis for numerical comparison.

Concrete block paving with a granite-aggregate face for a natural stone look and colour-fast, hard-wearing finish.

Typical Uses

  • Paths & paving
  • Public realm surfaces
  • Permeable groundworks

Key Performance

Durable external surface with slip resistance.

Specification Actions

  • Specify GGBS/PFA cement replacement (target: 50%+ replacement).
  • Request EPD showing embodied carbon per m3.
  • Calculate transport distances for primary materials.

Indicative Health & Indoor Air

low Risk

Inert cast-concrete paving unit; standard cutting-dust (silica) precautions when cutting.

Evidence:Third-party verified

Specification

Range
Fusion 80 mm block paving
Collection
Fusion
Finish
Granite-aggregate concrete block paving
Thickness
80mm
Service life
50 years

Cookies — essential ones keep the site working; optional analytics help us improve it. No advertising cookies.