STEICOinstall Wood Fibre Board
A wood fibre insulation board for service voids, internal linings and between-stud applications, made from softwood fibre in a dry process. Vapour-open and dense enough to give useful decrement delay, so it works for summer overheating as well as winter heat loss.
Carbon and evidence
Product Evidence
Evidence currently held for the STEICO product record.
Recorded Carbon Result
A1–A3 GWP-total per m³. Negative because 244 kgCO2e of biogenic carbon is held in the wood fibre. The EPD declares C3 = +239 kgCO2e when the board is processed at end of life, so the store is a deferral, not a permanent removal. Declared per m³ — divide by thickness for an m² figure.
Indicator: GWP-total
A1–A3 covers raw-material supply, transport to manufacture and manufacturing. It is product-stage information, not a whole-life result.
Environmental Product Declaration
EPD recorded- Coverage
- Specific product
- Declared unit
- 1 m³
- Programme
- EPD Global / EPD Norge
- Registration
- NEPD-11324-11324-2
- Standard
- EN 15804:2012+A2:2019
- Valid until
- 2031-03-26
- Verification
- Third-party verified
Place of production: Czarnków, Poland. Reference service life 50 years. The older STEICO IBU declarations for wet- and dry-process boards (EPD-STE-20200173/20200174, EN 15804+A1) both expired 19 November 2025 and were not used.
Carbon profile
kgCO2e per 1 m³ of STEICOinstall board · each bar starts at zero · local scale
A1-A3 product
-138
A4-A5 site*
4.64
B use
—
C end of life
240
D reuse / recycling
-102
Stores more carbon than making it emits — and the stored carbon largely leaves again at end of life.
Reported GWP Modules
Displayed as stored; modules are not added together here.
A1–A3
-138 kgCO₂e
per 1 m³ of STEICOinstall board
A4*
4.64 kgCO₂e
per 1 m³ of STEICOinstall board
C1
0 kgCO₂e
per 1 m³ of STEICOinstall board
C2
0.725 kgCO₂e
per 1 m³ of STEICOinstall board
C3
239 kgCO₂e
per 1 m³ of STEICOinstall board
C4
0 kgCO₂e
per 1 m³ of STEICOinstall board
D
-102 kgCO₂e
per 1 m³ of STEICOinstall board
Service Life — the B4 Replacement Input
50 years · EPD reference service life
≈2 installations over a 60-year building study period.
Sourced Product Claims
- 64.6 kg biogenic carbon per m³ (stores 244, releases 239 at end of life)Third-party verifiedSource
1 claim is held in the staging record but not presented as product evidence because an exact public source has not yet been mapped.
Evidence Sources
EPD Global / EPD Norge
Coverage: STEICOinstall wood fibre board
Comparison Status
This result should be displayed for information only and not ranked against another product.
- • The carbon result is not linked to an evidence source.
- • The EPD is not linked to an evidence source.
Evidence Gaps
- •1 sustainability claim is withheld because exact public evidence is not mapped.
Design & Specification Notes
Qualitative notes for early design discussion. Not product-specific EPD evidence, and not a basis for numerical comparison.
A wood fibre insulation board for service voids, internal linings and between-stud applications, made from softwood fibre in a dry process.
Typical Uses
- •Thermal envelope
- •Roof/wall cavities
- •Airtightness layers
Key Performance
Good thermal resistance with reduced heat loss.
Specification Actions
- •Confirm FSC or PEFC certification for all timber products.
- •Request chain-of-custody documentation from supplier.
- •Compare embodied carbon of insulation options (natural vs synthetic).
Indicative Health & Indoor Air
Specification
- Collection
- STEICO wood fibre insulation
- Finish
- Flexible wood fibre insulation board
- Service life
- 50 years