FLAGON SR SC PVC
Soprema’s exposed PVC single ply: flexible PVC on a polyester reinforcement, single-layer, with high weathering and puncture resistance. Average thickness 1.61 mm per the range EPD.
Carbon and evidence
Product Evidence
Evidence currently held for the Soprema product record.
Recorded Carbon Result
A1–A3 GWP-total per m² of average FLAGON PVC (1.87 kg/m²), per EPD-IES-0001604:002. The EPD states FLAGON SR SC sits +33% above this range average.
Indicator: GWP-total
A1–A3 covers raw-material supply, transport to manufacture and manufacturing. It is product-stage information, not a whole-life result.
Environmental Product Declaration
EPD recorded- Coverage
- Product family
- Declared unit
- 1 m² of average FLAGON PVC product (1.87 kg, average thickness 1.49 mm)
- Programme
- The International EPD System (EPD International AB)
- Registration
- EPD-IES-0001604:002 (S-P-01604)
- Standard
- EN 15804+A2
- Valid until
- 2030-01-21
- Verification
- Third-party verified
Range-average declaration covering FLAGON SR, SR SC, SR DE, Sb, S, SV, SA-300 and SR FR M2, from Soprema srl, Chignolo d’Isola, Italy. The EPD prints per-range variation against the average — FLAGON SR SC is +33% — held as a note rather than derived into a per-product figure.
Reported GWP Modules
Displayed as stored; modules are not added together here.
A1–A3
6.01 kgCO₂e
per 1 m² of average FLAGON PVC product (1.87 kg)
Comparison Status
This result should be displayed for information only and not ranked against another product.
- • The PCR and version are missing.
- • The carbon result is not linked to an evidence source.
- • The EPD is not linked to an evidence source.
Evidence Gaps
- •No A4–D lifecycle results are held beyond the product stage.
- •No product-specific circularity or material-health claims are recorded.
Design & Specification Notes
Qualitative notes for early design discussion. Not product-specific EPD evidence, and not a basis for numerical comparison.
Soprema’s exposed PVC single ply: flexible PVC on a polyester reinforcement, single-layer, with high weathering and puncture resistance.
Typical Uses
- •Roof coverings
- •Waterproofing layer
- •Weather protection
Key Performance
High durability in wet exposure and wind uplift.
Typical Service-Life Estimate
40 yearsGeneric estimate for early design discussion; confirm with the manufacturer.
Specification Actions
- •Confirm the current EPD covers the selected product, finish and manufacturing route.
- •Calculate transport distances for primary materials.
- •Document material reuse or reclaimed content percentages.
Indicative Health & Indoor Air
Installation risks (torch application, hot works, resin handling) are the installer’s to manage; follow the current manufacturer guidance.
Specification
- Finish
- PVC single ply membrane, polyester reinforced