Mineral Microcement

Thin-coat mineral microcement for walls and floors; seamless, tactile, and hard-wearing.

Carbon and evidence

Product Evidence

Generic material record — no manufacturer product attached.

AI-estimated material

Evidence Base

Category estimate

No product evidence is attached to this generic material, so nothing on this card is numerical. The guidance below is qualitative — an AI-assisted category profile — for early design discussion, not for figures.

Next step: request a current product EPD or manufacturer carbon declaration, or swap in a branded product that holds one.

What's missing (3)

•No current product EPD is recorded.
•No quantified carbon result is recorded.
•No product-specific circularity or material-health claims are recorded.

Service Life — the B4 Replacement Input

20 years · basis not recorded

≈3 installations over a 60-year building study period.

B4 (replacement) follows the building, not the product: an assessor multiplies replacement cycles by project quantities. This record supplies the service life and does not compute B4.

Design & Specification Notes

Thin-coat mineral microcement for walls and floors; seamless, tactile, and hard-wearing.

Typical Uses

•Seamless interior finish
•Wet areas
•Low-build overlays

Key Performance

Seamless, low-build finish for wet areas.

Specification Actions

•Provide an EPD (EN 15804) or verified embodied carbon figure (A1–A3), and state the life-cycle stages covered.
•Verify sealer is low-VOC
•Confirm maintenance and repair protocol

Indicative Health & Indoor Air

low Risk

Inert once cured. Sealers should be verified for low VOC content.

Evidence:No evidence held

Products in this category

3 products from 2 manufacturers. Ordered by the evidence each record holds, never by commercial standing.

Specification

Finish: Seamless mineral microcement
Service life: 20 years