Marshalls Beany Combined Kerb & Drainage

Name: Marshalls Beany Combined Kerb & Drainage
Brand: Marshalls

Combined kerb-and-drainage unit — a single precast concrete block that forms the road/footway kerb and an integral surface-water drainage channel, replacing a separate kerb, gully and pipe run. A SuDS-conveyance product. Declared per linear metre. Module B1 shows carbonation re-absorption over the service life.

Manufacturer page

Carbon and evidence

Product Evidence

Evidence currently held for the Marshalls product record.

Marshalls

Recorded Carbon Result

22.1kgCO₂e/linear m

A1–A3 GWP-total per declared unit, per EPD

Indicator: GWP-total

Marshalls Beany Combined Kerb & Drainage Environmental Product Declaration · EN 15804+A2 core environmental impact indicators

A1–A3 covers raw-material supply, transport to manufacture and manufacturing. It is product-stage information, not a whole-life result.

Environmental Product Declaration

EPD recorded

Coverage: Representative product
Declared unit: Not recorded
Programme: EPD Hub
Registration: EPD Hub HUB-0547
Standard: EN 15804+A2
Valid until: 2028-06-30
Verification: Third-party verified

Beany (Mini Beany / Beany two-piece) combined kerb-and-drainage; declared per 1 linear metre at 197 kg.

Read the EPDSource: EN 15804+A2 core environmental impact indicators

Carbon profile

kgCO2e per 1 linear metre (197 kg) · each bar starts at zero · local scale

A1-A3 product

22.1

A4-A5 site*

6.12

B use

-1.74

C end of life

1.76

D reuse / recycling

1.25

adds carbon stores or removes EPD scenario* reuse/recycling potential (D)

* EPD transport and installation scenario, not this project's. Module D shows potential impacts or benefits from reuse, recovery or recycling after the product's assessed life. It is reported separately and never added to A-C. Do not compare bar lengths between materials. Each chart may use a different scale and declared unit.

Reported GWP Modules

Displayed as stored; modules are not added together here.

A1–A3

22.1 kgCO₂e

per 1 linear metre (197 kg)

A4*

5.66 kgCO₂e

per 1 linear metre (197 kg)

A5*

0.455 kgCO₂e

per 1 linear metre (197 kg)

-1.74 kgCO₂e

per 1 linear metre (197 kg)

0.0775 kgCO₂e

per 1 linear metre (197 kg)

0.866 kgCO₂e

per 1 linear metre (197 kg)

0.74 kgCO₂e

per 1 linear metre (197 kg)

0.0734 kgCO₂e

per 1 linear metre (197 kg)

1.25 kgCO₂e

per 1 linear metre (197 kg)

* A4/A5 are EPD scenarios, not project-specific results. Module D is outside the A–C system boundary and is not added to A–C. Module nomenclature follows BS EN 15978 / EN 15804. Declared values are suitable as inputs to a whole life carbon assessment under the RICS Professional Standard (2nd edition); this panel is not an assessment.

Upfront Carbon (A1–A5)*

28.2 kgCO₂e per 1 linear metre (197 kg)

A1–A3 22.1 + A4 5.66 + A5 0.455 · GWP-total, as declared

* Includes the EPD’s A4/A5 scenario assumptions, not project-specific transport or installation. This is the aggregation the proposed Part Z applies upfront limits to. The A1–A3 figure includes declared biogenic storage of -7.49 kgCO₂e; Part Z aggregates upfront carbon excluding sequestered carbon, which is the assessor's adjustment to make.

Service Life — the B4 Replacement Input

50 years · EPD reference service life

≈2 installations over a 60-year building study period.

B4 (replacement) follows the building, not the product: an assessor multiplies replacement cycles by project quantities. This record supplies the service life and does not compute B4.

Sourced Product Claims

Third-party verified EPD (EPD Hub, EN 15804+A2)Third-party verifiedSource

Evidence Sources

Marshalls Beany Combined Kerb & Drainage Environmental Product Declaration

EPD Hub · EN 15804+A2 core environmental impact indicators

Coverage: Beany (Mini Beany / Beany two-piece) combined kerb-and-drainage; declared per 1 linear metre at 197 kg.

Third-party verified

Comparison Status

This result should be displayed for information only and not ranked against another product.

• The declared or functional unit is missing.

Design & Specification Notes

Qualitative notes for early design discussion. Not product-specific EPD evidence, and not a basis for numerical comparison.

Combined kerb-and-drainage unit — a single precast concrete block that forms the road/footway kerb and an integral surface-water drainage channel, replacing a separate kerb, gully and pipe run.

Typical Uses

•Paths & paving
•Public realm surfaces
•Permeable groundworks

Key Performance

Durable external surface with slip resistance.

Specification Actions

•Specify GGBS/PFA cement replacement (target: 50%+ replacement).
•Request EPD showing embodied carbon per m3.
•Calculate transport distances for primary materials.

Indicative Health & Indoor Air

low Risk

Inert concrete; no in-use emissions of concern.

Evidence:Third-party verified

Specification

Range: Beany Combined Kerb & Drainage
Collection: Water Management
Finish: Combined concrete kerb & drainage block
Service life: 50 years