Marley Clay Roof Tile
Fired-clay roof tiles for pitched roofs — plain and interlocking (Acme Single & Double Camber, Canterbury, Hawkins and others). Natural, colour-fast fired clay with a long service life; kilns partly biomass-fired, giving a lower net product-stage footprint than the fossil figure alone.
Carbon and evidence
Product Evidence
Evidence currently held for the Marley product record.
Recorded Carbon Result
A1–A3 GWP-total per m² of roof, per EPD THIS FIGURE IS FORMAT-SPECIFIC — small-format plain tile, 60 tiles/m², 64 kg/m². Pantiles (16.25 tiles/m², 43 kg/m²) are 3.33 — 33% below the figure on this record.
A1–A3 covers raw-material supply, transport to manufacture and manufacturing. It is product-stage information, not a whole-life result.
Environmental Product Declaration
EPD recorded- Coverage
- Product family
- Declared unit
- 1 m² of roof (64 kg)
- Programme
- EPD Hub
- Registration
- HUB-1593
- Standard
- EN 15804+A2
- Valid until
- 2029-06-13
- Verification
- Third-party verified
This figure is format-specific: it is the small-format plain tile, 60 tiles/m² at 64 kg/m², declared in HUB-1593. The declaration carries a conversion table for alternative tile sizes and the other formats differ materially — pantiles, at 16.25 tiles/m² and 43 kg/m², come to 3.33. Tile format rather than tile material is the dominant variable in a tiled roof’s carbon per square metre.
Carbon profile
kgCO2e per 1 m² of roof · each bar starts at zero · local scale
A1-A3 product
4.75
A4-A5 site*
3.63
B use
—
C end of life
0.874
D reuse / recycling
-1.11
Reported GWP Modules
Displayed as stored; modules are not added together here.
A1–A3
4.75 kgCO₂e
per 1 m² of roof
A4*
1.06 kgCO₂e
per 1 m² of roof
A5*
2.57 kgCO₂e
per 1 m² of roof
C1
0 kgCO₂e
per 1 m² of roof
C2
0.279 kgCO₂e
per 1 m² of roof
C3
0.557 kgCO₂e
per 1 m² of roof
C4
0.0378 kgCO₂e
per 1 m² of roof
D
-1.11 kgCO₂e
per 1 m² of roof
Upfront Carbon (A1–A5)*
8.38 kgCO₂e per 1 m² of roof
A1–A3 4.75 + A4 1.06 + A5 2.57 · as declared
Service Life — the B4 Replacement Input
60 years · EPD reference service life
≈1 installation over a 60-year building study period.
2 claims and 2 certifications are held in the staging record but not presented as product evidence because an exact public source has not yet been mapped.
Comparison Status
This result should be displayed for information only and not ranked against another product.
- • The PCR and version are missing.
- • The GWP indicator is missing.
- • The carbon result is not linked to an evidence source.
- • The EPD is not linked to an evidence source.
Evidence Gaps
- •2 sustainability claims are withheld because exact public evidence is not mapped.
- •2 certifications are withheld because exact public evidence is not mapped.
Design & Specification Notes
Qualitative notes for early design discussion. Not product-specific EPD evidence, and not a basis for numerical comparison.
Fired-clay roof tiles for pitched roofs — plain and interlocking (Acme Single & Double Camber, Canterbury, Hawkins and others).
Typical Uses
- •Roof coverings
- •Waterproofing layer
- •Weather protection
Key Performance
High durability in wet exposure and wind uplift.
Specification Actions
- •Confirm the current EPD covers the selected product, finish and manufacturing route.
- •Calculate transport distances for primary materials.
- •Document material reuse or reclaimed content percentages.
Indicative Health & Indoor Air
Inert fired-clay tile; standard cutting-dust (silica) precautions when cutting.
Specification
- Range
- Acme / Canterbury / Hawkins
- Collection
- Clay Roof Tiles
- Finish
- Clay roof tile (plain & interlocking)
- Service life
- 60 years