Lindner Metal Ceiling System

Name: Lindner Metal Ceiling System
Brand: Lindner Group

Powder-coated steel ceiling system covering Lindner's metal ceiling range. Its declared unit is 1 m², but the declaration notes that area weight varies by system type, so the figure is not tied to a fixed panel mass.

Manufacturer page

Carbon and evidence

Product Evidence

Evidence currently held for the Lindner Group product record.

Lindner Group

Recorded Carbon Result

19.1kgCO₂e/m²

A1–A3 GWP-total per 1 m² of Lindner metal ceiling system made of steel, as declared in EPD-LIN-20250234-IBI1-EN. Module D (-11.3) is excluded.

Indicator: GWP-total

Lindner Metal Ceiling System Environmental Product Declaration · EPD-LIN-20250234-IBI1-EN

A1–A3 covers raw-material supply, transport to manufacture and manufacturing. It is product-stage information, not a whole-life result.

Environmental Product Declaration

EPD recorded

Coverage: Product family
Declared unit: 1 m² of Lindner metal ceiling system made of steel
Programme: Institut Bauen und Umwelt e.V. (IBU)
Registration: EPD-LIN-20250234-IBI1-EN
Standard: EN 15804+A2
Valid until: 2030-08-19
Verification: Third-party verified

Covers Lindner metal ceiling systems in steel, including the LMD-B post-cap range. The declaration states explicitly that area weight in kg/m² VARIES by system, so no single mass per square metre is declared and none is recorded here.

Read the EPDSource: EPD-LIN-20250234-IBI1-EN

Reported GWP Modules

Displayed as stored; modules are not added together here.

A1–A3

19.1 kgCO₂e

per 1 m² of Lindner metal ceiling system made of steel

* A4/A5 are EPD scenarios, not project-specific results. Module nomenclature follows BS EN 15978 / EN 15804. Declared values are suitable as inputs to a whole life carbon assessment under the RICS Professional Standard (2nd edition); this panel is not an assessment.

Sourced Product Claims

Third-party verified EPD (EPD-LIN-20250234-IBI1-EN)Third-party verifiedSource

Evidence Sources

Lindner Metal Ceiling System Environmental Product Declaration

Institut Bauen und Umwelt e.V. (IBU) · EPD-LIN-20250234-IBI1-EN

Coverage: Covers Lindner metal ceiling systems in steel, including the LMD-B post-cap range. The declaration states explicitly that area weight in kg/m² VARIES by system, so no single mass per square metre is declared and none is recorded here.

Third-party verified

Comparison Status

This result should be displayed for information only and not ranked against another product.

• The PCR and version are missing.

Design & Specification Notes

Qualitative notes for early design discussion. Not product-specific EPD evidence, and not a basis for numerical comparison.

Powder-coated steel ceiling system covering Lindner's metal ceiling range.

Typical Uses

•Interior ceilings
•Acoustic control
•Service zones

Key Performance

Confirm acoustic, fire, humidity and demountability performance for the selected ceiling system.

Typical Service-Life Estimate

30 years

Generic estimate for early design discussion; confirm with the manufacturer.

Specification Actions

•Verify product-specific recycled content and manufacturing energy route.
•Use reversible fixings to support high-value metal recovery.
•Confirm the current EPD covers the selected product, finish and manufacturing route.

Indicative Health & Indoor Air

low Risk

Evidence:Third-party verified

Specification

Range: Metal Ceiling
Finish: Powder-coated steel ceiling system