Lignacite 7.3N

The block the company is named after — lignum plus aggregate — a fair-faced masonry block they have been putting biomass into since the 1940s. Left exposed it gives a finished internal wall without plaster, which is a carbon saving the declaration does not capture because it removes a whole finishing trade.

Manufacturer page
Lignacite Lignacite 7.3N

Carbon and evidence

Product Evidence

Evidence currently held for the Lignacite product record.

Lignacite

Recorded Carbon Result

20.9kgCO₂e/m²

A1–A3 GWP-total per m² of 100 mm wall (162.55 kg). Essentially all fossil; this block holds no meaningful biogenic carbon. Carbonation adds a further declared -1.16 in use (B1).

Indicator: GWP-total

Lignacite 7.3N (HUB-0145)

A1–A3 covers raw-material supply, transport to manufacture and manufacturing. It is product-stage information, not a whole-life result.

Environmental Product Declaration

EPD recorded
Coverage
Specific product
Declared unit
1 m² 100 mm block wall, 162.55 kg
Programme
EPD Hub
Registration
HUB-0145
Standard
EN 15804:2012+A2:2019, ISO 14025, ISO 21930
Valid until
2027-10-07
Verification
Third-party verified

Lignacite 7.3N, 7.3 N/mm², 100 mm. Declared per square metre of wall, so it is directly comparable with Lignacite’s other blocks.

Read the EPDSource: Core environmental impact indicators table (EN 15804+A2), GWP rows

Carbon profile

kgCO2e per 1 m² of 100 mm wall · each bar starts at zero · local scale

A1-A3 product

20.9

A4-A5 site*

1.34

B use

-1.16

C end of life

2

D reuse / recycling

-1.08

adds carbon stores or removes EPD scenario* reuse/recycling potential (D)
* EPD transport and installation scenario, not this project's. Module D shows potential impacts or benefits from reuse, recovery or recycling after the product's assessed life. It is reported separately and never added to A-C. Do not compare bar lengths between materials. Each chart may use a different scale and declared unit.

Reported GWP Modules

Displayed as stored; modules are not added together here.

A1–A3

20.9 kgCO₂e

per 1 m² of 100 mm wall

A4*

1.32 kgCO₂e

per 1 m² of 100 mm wall

A5*

0.0233 kgCO₂e

per 1 m² of 100 mm wall

B1

-1.16 kgCO₂e

per 1 m² of 100 mm wall

C1

0.55 kgCO₂e

per 1 m² of 100 mm wall

C2

0.758 kgCO₂e

per 1 m² of 100 mm wall

C3

0.518 kgCO₂e

per 1 m² of 100 mm wall

C4

0.171 kgCO₂e

per 1 m² of 100 mm wall

D

-1.08 kgCO₂e

per 1 m² of 100 mm wall

* A4/A5 are EPD scenarios, not project-specific results. Module D is outside the A–C system boundary and is not added to A–C. Module nomenclature follows BS EN 15978 / EN 15804. Declared values are suitable as inputs to a whole life carbon assessment under the RICS Professional Standard (2nd edition); this panel is not an assessment.

Upfront Carbon (A1–A5)*

22.2 kgCO₂e per 1 m² of 100 mm wall

A1–A3 20.9 + A4 1.32 + A5 0.0233 · GWP-total, as declared

* Includes the EPD’s A4/A5 scenario assumptions, not project-specific transport or installation. This is the aggregation the proposed Part Z applies upfront limits to. The A1–A3 figure includes declared biogenic storage of <0.001 kgCO₂e; Part Z aggregates upfront carbon excluding sequestered carbon, which is the assessor's adjustment to make.

Service Life — the B4 Replacement Input

100 years · EPD reference service life

The declaration states a 100-year reference service life.

≈1 installation over a 60-year building study period.

B4 (replacement) follows the building, not the product: an assessor multiplies replacement cycles by project quantities. This record supplies the service life and does not compute B4.

Sourced Product Claims

  • Absorbs 1.16 kgCO2e/m² by carbonation in use (module B1)Third-party verifiedSource
  • Third-party verified EPD, valid to 2027-10-07Third-party verifiedSource

Evidence Sources

Third-party verified

Comparison Status

This result should be displayed for information only and not ranked against another product.

  • • The EPD is not linked to an evidence source.

Design & Specification Notes

Qualitative notes for early design discussion. Not product-specific EPD evidence, and not a basis for numerical comparison.

The block the company is named after — lignum plus aggregate — a fair-faced masonry block they have been putting biomass into since the 1940s.

Typical Uses

  • Primary frame
  • Long-span elements
  • Load-bearing supports

Key Performance

High load-bearing capacity for primary frame.

Specification Actions

  • Specify GGBS/PFA cement replacement (target: 50%+ replacement).
  • Request EPD showing embodied carbon per m3.
  • Calculate transport distances for primary materials.

Indicative Health & Indoor Air

low Risk
Evidence:Third-party verified

Specification

Range
Lignacite
Finish
Facing block with biomass aggregate, 100 mm
Thickness
100 mm
Service life
100 years
Country of manufacture
United Kingdom

Cookies — essential ones keep the site working; optional analytics help us improve it. No advertising cookies.