Swedoor ADVANCE-LINE Interior Door
A standard 40 mm unglazed interior door leaf from JELD-WEN’s Swedoor ADVANCE-LINE — honeycomb or tubular core between HDF faces on a softwood frame, factory-painted. It is the ordinary door of Nordic and UK housebuilding, and unusually for an internal door it carries a declared figure at all. The declaration is per square metre of leaf: production is a modest 11.3 kgCO2e/m² because the timber and board content holds 27.6 kgCO2e of biogenic carbon against 38.8 of fossil emissions — and the same declaration returns +30.3 at end-of-life incineration, the usual timber waterfall.
Carbon and evidence
Product Evidence
Evidence currently held for the JELD-WEN product record.
Recorded Carbon Result
A1–A3 GWP-total per m² of door leaf (18.76 kg): 38.8 fossil less 27.6 biogenic held in the timber and wood-based boards. A standard single leaf (~1.66 m²) is therefore ~19 kgCO2e to produce. The biogenic store returns as +30.3 at end-of-life incineration (C3), so cradle-to-grave is positive.
Indicator: GWP-total
A1–A3 covers raw-material supply, transport to manufacture and manufacturing. It is product-stage information, not a whole-life result.
Environmental Product Declaration
EPD recorded- Coverage
- Product family
- Declared unit
- 1 m² door leaf, 18.76 kg/m²
- Programme
- EPD Hub
- Registration
- HUB-1206
- Standard
- EN 15804:2012+A2:2019, ISO 14025, ISO 21930; EN 17213 Windows and doors
- Valid until
- 2029-03-07
- Verification
- Third-party verified
Swedoor ADVANCE-LINE Unclassified Interior doors, 40 mm, unglazed, Craft. Declared per m² of leaf, not per door — a standard 838 × 1981 mm leaf is ~1.66 m², so ~18.7 kgCO2e per door at the declared figure. Sibling declarations cover the glazed and classified variants (HUB-0988 and others). Production in Finland and Denmark; the declared manufacturer address is JELD-WEN, Sheffield.
Carbon profile
kgCO2e per 1 m² of door leaf (18.76 kg) · each bar starts at zero · local scale
A1-A3 product
11.3
A4-A5 site*
3.07
B use
—
C end of life
31.7
D reuse / recycling
11.4
End of life is the largest of the modules this EPD declares.
Reported GWP Modules
Displayed as stored; modules are not added together here.
A1–A3
11.3 kgCO₂e
per 1 m² of door leaf (18.76 kg)
A4*
2.03 kgCO₂e
per 1 m² of door leaf (18.76 kg)
A5*
1.04 kgCO₂e
per 1 m² of door leaf (18.76 kg)
C1
0 kgCO₂e
per 1 m² of door leaf (18.76 kg)
C2
0.088 kgCO₂e
per 1 m² of door leaf (18.76 kg)
C3
30.3 kgCO₂e
per 1 m² of door leaf (18.76 kg)
C4
1.34 kgCO₂e
per 1 m² of door leaf (18.76 kg)
D
11.4 kgCO₂e
per 1 m² of door leaf (18.76 kg)
Upfront Carbon (A1–A5)*
14.4 kgCO₂e per 1 m² of door leaf (18.76 kg)
A1–A3 11.3 + A4 2.03 + A5 1.04 · GWP-total, as declared
Evidence Sources
Comparison Status
This result should be displayed for information only and not ranked against another product.
- • The carbon result is not linked to an evidence source.
- • The EPD is not linked to an evidence source.
Design & Specification Notes
Qualitative notes for early design discussion. Not product-specific EPD evidence, and not a basis for numerical comparison.
A standard 40 mm unglazed interior door leaf from JELD-WEN’s Swedoor ADVANCE-LINE — honeycomb or tubular core between HDF faces on a softwood frame, factory-painted.
Typical Uses
- •Internal doors
- •Entrance doors
- •Fire-rated partitions
Key Performance
Provides access control and fire separation.
Specification Actions
- •Confirm FSC or PEFC certification for all timber products.
- •Request chain-of-custody documentation from supplier.
- •Confirm the current EPD covers the selected product, finish and manufacturing route.
Indicative Health & Indoor Air
Specification
- Range
- Swedoor ADVANCE-LINE
- Finish
- Lightweight interior door leaf, 40 mm, unglazed, painted finish
- Country of manufacture
- Finland / Denmark