Insulated Render (Sto-type)
External wall insulation with reinforced render finish; Sto-type system with full RAL colour range.
Carbon and evidence
Product Evidence
Generic material record — no manufacturer product attached.
Evidence Base
Category estimateNo product evidence is attached to this generic material, so nothing on this card is numerical. The guidance below is qualitative — an AI-assisted category profile — for early design discussion, not for figures.
Next step: request a current product EPD or manufacturer carbon declaration, or swap in a branded product that holds one.
What's missing (3)
- •No current product EPD is recorded.
- •No quantified carbon result is recorded.
- •No product-specific circularity or material-health claims are recorded.
Service Life — the B4 Replacement Input
40 years · basis not recorded
≈2 installations over a 60-year building study period.
Design & Specification Notes
External wall insulation with reinforced render finish; Sto-type system with full RAL colour range.
Typical Uses
- •Facade cladding
- •Weather protection
- •External accents
Key Performance
Weather-resistant finish for facade exposure.
Specification Actions
- •Provide an EPD (EN 15804) or verified embodied carbon figure (A1–A3), and state the life-cycle stages covered.
- •Verify insulation board composition and climate impact
- •Confirm mesh and basecoat are low-cement
Indicative Health & Indoor Air
- •vocs
- •biocides
Render may contain biocides. EPS/PIR boards have low emissions once installed. External use minimises impact.
Products in this category
3 products from 2 manufacturers. Ordered by the evidence each record holds, never by commercial standing.
Specification
- Finish
- Insulated render system — select RAL colour
- Service life
- 40 years