FENIX NTM
A super-matt interior surfacing material by Arpa Industriale for furniture, cabinetry, worktops, doors and interior fittings. Its acrylic-resin outer surface is electron-beam cured, giving low light reflectivity, a soft touch, resistance to fingerprints and thermal healing of superficial micro-scratches.
Carbon and evidence
Product Evidence
Evidence currently held for the FENIX product record.
Recorded Carbon Result
A1–A3 GWP-total per m² of finished panel at 1.2 mm, per EPD
Indicator: GWP-total
FENIX NTM Environmental Product Declaration · PDF p. 9, mandatory environmental impact tableA1–A3 covers raw-material supply, transport to manufacture and manufacturing. It is product-stage information, not a whole-life result.
Environmental Product Declaration
EPD recorded- Coverage
- Representative product
- Declared unit
- 1 m² finished panel, 1.2 mm (1.89 kg)
- Programme
- EPD International AB — The International EPD System
- Registration
- S-P-10172
- Standard
- EN 15804+A2
- Valid until
- 2028-10-30
- Verification
- Third-party verified
Representative FENIX NTM 1.2 mm matched-colour-core panel result.
Carbon profile
kgCO2e per 1 m² finished panel, 1.2 mm (1.89 kg) · each bar starts at zero · local scale
A1-A3 product
6.66
A4-A5 site*
—
B use
—
C end of life
3.51
D reuse / recycling
-1.86
Reported GWP Modules
Displayed as stored; modules are not added together here.
A1–A3
6.66 kgCO₂e
per 1 m² finished panel, 1.2 mm (1.89 kg)
C1
0.123 kgCO₂e
per 1 m² finished panel, 1.2 mm (1.89 kg)
C2
0.0201 kgCO₂e
per 1 m² finished panel, 1.2 mm (1.89 kg)
C3
3.37 kgCO₂e
per 1 m² finished panel, 1.2 mm (1.89 kg)
C4
0 kgCO₂e
per 1 m² finished panel, 1.2 mm (1.89 kg)
D
-1.86 kgCO₂e
per 1 m² finished panel, 1.2 mm (1.89 kg)
Service Life — the B4 Replacement Input
20 years · basis not recorded
≈3 installations over a 60-year building study period.
Sourced Certifications & Contributions
Sourced Product Claims
- Thermal healing of superficial micro-scratchesManufacturer declaredSource
- Low light reflectivity and anti-fingerprint surfaceManufacturer declaredSource
- FENIX NTM Bloom 0.7 mm uses renewable secondary bio-based materials and contains at least 67% bio-based content: 67 % minimum bio-based contentManufacturer declaredSource
Evidence Sources
EPD International AB — The International EPD System · PDF p. 9, mandatory environmental impact table
Coverage: Representative FENIX NTM 1.2 mm matched-colour-core panel result.
Arpa Industriale / FENIX
Coverage: FENIX NTM certification and responsible-sourcing options
Comparison Status
The record contains the basic metadata required for a controlled comparison. Products must still perform the same function and use compatible units, PCRs and lifecycle scope.
Design & Specification Notes
Qualitative notes for early design discussion. Not product-specific EPD evidence, and not a basis for numerical comparison.
A super-matt interior surfacing material by Arpa Industriale for furniture, cabinetry, worktops, doors and interior fittings.
Typical Uses
- •Hardware & fittings
- •Bathroom/kitchen fixtures
- •Accessories
Key Performance
Durable surface for daily wear.
Specification Actions
- •Confirm the current EPD covers the selected product, finish and manufacturing route.
- •Calculate transport distances for primary materials.
- •Document material reuse or reclaimed content percentages.
Indicative Health & Indoor Air
GREENGUARD Gold and M1 certifications document low chemical emissions for interior use.
Specification
- Collection
- FENIX NTM
- Finish
- Extremely matt, soft-touch anti-fingerprint surface
- Service life
- 20 years