Elevate UltraPly TPO
Elevate’s white heat-reflective TPO (a polypropylene/EPDM blend on polyester scrim), hot-air welded. UK Declarations of Performance cover 1.2, 1.5 and 1.8 mm.
Carbon and evidence
Product Evidence
Evidence currently held for the Elevate product record.
Recorded Carbon Result
No quantified carbon result held
Request a current product EPD or manufacturer carbon declaration.
Environmental Product Declaration
EPD expired- Coverage
- Product family
- Declared unit
- 1 m² of single ply roofing membrane for a stated product thickness
- Programme
- UL Environment
- Registration
- 4787742079.103.1
- Standard
- ISO 21930:2007 / EN 15804 (pre-+A2; single CML GWP indicator)
- Valid until
- 2024-07-01 · expired
- Verification
- Third-party verified
The declaration covering this membrane expired in July 2024, so no current figure is recorded. For reference it printed A1–A3 GWP of 4.05 / 4.57 / 5.32 / 7.03 kgCO2e/m² at 1.1 / 1.2 / 1.5 / 1.8 mm.
Evidence Gaps
- •The recorded EPD is expired and is retained as historical evidence only.
- •No quantified carbon result is recorded.
- •No product-specific circularity or material-health claims are recorded.
Design & Specification Notes
Qualitative notes for early design discussion. Not product-specific EPD evidence, and not a basis for numerical comparison.
Elevate’s white heat-reflective TPO (a polypropylene/EPDM blend on polyester scrim), hot-air welded.
Typical Uses
- •Roof coverings
- •Waterproofing layer
- •Weather protection
Key Performance
High durability in wet exposure and wind uplift.
Typical Service-Life Estimate
40 yearsGeneric estimate for early design discussion; confirm with the manufacturer.
Specification Actions
- •Confirm the current EPD covers the selected product, finish and manufacturing route.
- •Calculate transport distances for primary materials.
- •Document material reuse or reclaimed content percentages.
Indicative Health & Indoor Air
Installation risks (torch application, hot works, hot-air welding) are the installer’s to manage; follow the current manufacturer guidance.
Specification
- Finish
- TPO single ply membrane, white heat-reflective
- Thickness
- 1.2 / 1.5 / 1.8 mm