D-Neo Wall-Mounted Toilet Rimless

D-Neo Wall-Mounted Toilet Rimless, designed by Bertrand Lejoly as part of the Duravit D-Neo complete bathroom family. Rimless wall-mounted WC; 3/4.5 l flush.

Manufacturer page

Carbon and evidence

Product Evidence

Evidence currently held for the Duravit product record.

Duravit

Recorded Carbon Result

2653kgCO₂e/tonne

A1–A3 GWP-total per tonne of average sanitary ceramic

Indicator: GWP-total

D-Neo Wall-Mounted Toilet Rimless Environmental Product Declaration · PDF p. 8, LCA results per 1 tonne average sanitary ceramic

A1–A3 covers raw-material supply, transport to manufacture and manufacturing. It is product-stage information, not a whole-life result.

Environmental Product Declaration

EPD recorded

Coverage: Product family
Declared unit: 1 tonne average sanitary ceramic product
Programme: Institut Bauen und Umwelt e.V. (IBU)
Registration: EPD-DUR-20210288-IBC1-EN
Standard: EN 15804+A2
Valid until: 2027-01-23
Verification: Third-party verified

Average 2019 production from Duravit Hornberg for washbasins, toilets, urinals, cisterns and kitchen sinks; not a per-piece SKU value.

Read the EPDSource: PDF p. 8, LCA results per 1 tonne average sanitary ceramic

Carbon profile

kgCO2e per 1 tonne average sanitary ceramic product · each bar starts at zero · local scale

A1-A3 product

2653

A4-A5 site*

not declared

—

B use

not declared

—

C end of life

133

D reuse / recycling

0

adds carbon stores or removes EPD scenario* reuse/recycling potential (D)

* EPD transport and installation scenario, not this project's. Not declared: site, use. Module D shows potential impacts or benefits from reuse, recovery or recycling after the product's assessed life. It is reported separately and never added to A-C. Do not compare bar lengths between materials. Each chart may use a different scale and declared unit.

Reported GWP Modules

Displayed as stored; modules are not added together here.

A1–A3

2653 kgCO₂e

per 1 tonne average sanitary ceramic product

C1

0 kgCO₂e

per 1 tonne average sanitary ceramic product

C2

128 kgCO₂e

per 1 tonne average sanitary ceramic product

C3

0.186 kgCO₂e

per 1 tonne average sanitary ceramic product

C4

5.28 kgCO₂e

per 1 tonne average sanitary ceramic product

D

0 kgCO₂e

per 1 tonne average sanitary ceramic product

* A4/A5 are EPD scenarios, not project-specific results. Module D is outside the A–C system boundary and is not added to A–C. Module nomenclature follows BS EN 15978 / EN 15804. Declared values are suitable as inputs to a whole life carbon assessment under the RICS Professional Standard (2nd edition); this panel is not an assessment.

Service Life — the B4 Replacement Input

30 years · basis not recorded

≈2 installations over a 60-year building study period.

B4 (replacement) follows the building, not the product: an assessor multiplies replacement cycles by project quantities. This record supplies the service life and does not compute B4.

Sourced Product Claims

Sanitary ceramicManufacturer declaredSource
Covered by Duravit sanitary-ceramics product-group EPD (IBU)Manufacturer declaredSource

Evidence Sources

D-Neo Wall-Mounted Toilet Rimless product page

Duravit

Coverage: 2577090000

Manufacturer declared

D-Neo Wall-Mounted Toilet Rimless Environmental Product Declaration

Institut Bauen und Umwelt e.V. (IBU) · PDF p. 8, LCA results per 1 tonne average sanitary ceramic

Coverage: Average 2019 production from Duravit Hornberg for washbasins, toilets, urinals, cisterns and kitchen sinks; not a per-piece SKU value.

Third-party verified

Comparison Status

The record contains the basic metadata required for a controlled comparison. Products must still perform the same function and use compatible units, PCRs and lifecycle scope.

Design & Specification Notes

Qualitative notes for early design discussion. Not product-specific EPD evidence, and not a basis for numerical comparison.

D-Neo Wall-Mounted Toilet Rimless, designed by Bertrand Lejoly as part of the Duravit D-Neo complete bathroom family.

Typical Uses

•Hardware & fittings
•Bathroom/kitchen fixtures
•Accessories

Specification Actions

•Confirm the current EPD covers the selected product, finish and manufacturing route.
•Calculate transport distances for primary materials.
•Document material reuse or reclaimed content percentages.

Indicative Health & Indoor Air

low Risk

Use and installation risks depend on the selected product and installer method; follow the current Duravit instructions.

Evidence:Third-party verified

Specification

Product code: 2577090000
Range: D-Neo
Collection: D-Neo
Finish: Sanitary ceramic, high gloss or matt with DuraShield
Service life: 30 years

Cookies — essential ones keep the site working; optional analytics help us improve it. No advertising cookies.