D-Neo Built-In Bathtub

D-Neo Built-In Bathtub, designed by Bertrand Lejoly as part of the Duravit D-Neo complete bathroom family. 1800 × 800 mm; with overflow; built-in installation.

Manufacturer page
Duravit D-Neo Built-In Bathtub

Carbon and evidence

Product Evidence

Evidence currently held for the Duravit product record.

Duravit

Recorded Carbon Result

77.74kgCO₂e/m²

A1–A3 GWP-total per m² of average acrylic surface

Indicator: GWP-total

D-Neo Built-In Bathtub Environmental Product Declaration · PDF p. 8, LCA results per 1 m² acrylic surface

A1–A3 covers raw-material supply, transport to manufacture and manufacturing. It is product-stage information, not a whole-life result.

Environmental Product Declaration

EPD recorded
Coverage
Product family
Declared unit
1 m² acrylic surface of an average product
Programme
Institut Bauen und Umwelt e.V. (IBU)
Registration
EPD-DUR-20210239-IBC1-EN
Standard
EN 15804+A2
Valid until
2026-12-19
Verification
Third-party verified

Average 2019 Duravit acrylic production at Cairo covering bathtubs, shower trays and bath panels; not a per-piece bathtub value.

Read the EPDSource: PDF p. 8, LCA results per 1 m² acrylic surface

Carbon profile

kgCO2e per 1 m² acrylic surface of an average product · each bar starts at zero · local scale

A1-A3 product

77.7

A4-A5 site*

not declared

B use

not declared

C end of life

29.5

D reuse / recycling

-0.0207

adds carbon stores or removes EPD scenario* reuse/recycling potential (D)
* EPD transport and installation scenario, not this project's. Not declared: site, use. Module D shows potential impacts or benefits from reuse, recovery or recycling after the product's assessed life. It is reported separately and never added to A-C. Do not compare bar lengths between materials. Each chart may use a different scale and declared unit.

Reported GWP Modules

Displayed as stored; modules are not added together here.

A1–A3

77.7 kgCO₂e

per 1 m² acrylic surface of an average product

C1

0 kgCO₂e

per 1 m² acrylic surface of an average product

C2

2.29 kgCO₂e

per 1 m² acrylic surface of an average product

C3

0 kgCO₂e

per 1 m² acrylic surface of an average product

C4

27.2 kgCO₂e

per 1 m² acrylic surface of an average product

D

-0.0207 kgCO₂e

per 1 m² acrylic surface of an average product

* A4/A5 are EPD scenarios, not project-specific results. Module D is outside the A–C system boundary and is not added to A–C. Module nomenclature follows BS EN 15978 / EN 15804. Declared values are suitable as inputs to a whole life carbon assessment under the RICS Professional Standard (2nd edition); this panel is not an assessment.

Service Life — the B4 Replacement Input

30 years · basis not recorded

≈2 installations over a 60-year building study period.

B4 (replacement) follows the building, not the product: an assessor multiplies replacement cycles by project quantities. This record supplies the service life and does not compute B4.

Sourced Product Claims

  • Sanitary acrylic bathManufacturer declaredSource
  • Covered by Duravit sanitary-acrylic product-group EPD (IBU)Manufacturer declaredSource

Evidence Sources

D-Neo Built-In Bathtub product page

Duravit

Coverage: 700475000000000

Manufacturer declared
D-Neo Built-In Bathtub Environmental Product Declaration

Institut Bauen und Umwelt e.V. (IBU) · PDF p. 8, LCA results per 1 m² acrylic surface

Coverage: Average 2019 Duravit acrylic production at Cairo covering bathtubs, shower trays and bath panels; not a per-piece bathtub value.

Third-party verified

Comparison Status

The record contains the basic metadata required for a controlled comparison. Products must still perform the same function and use compatible units, PCRs and lifecycle scope.

Design & Specification Notes

Qualitative notes for early design discussion. Not product-specific EPD evidence, and not a basis for numerical comparison.

D-Neo Built-In Bathtub, designed by Bertrand Lejoly as part of the Duravit D-Neo complete bathroom family.

Typical Uses

  • Hardware & fittings
  • Bathroom/kitchen fixtures
  • Accessories

Specification Actions

  • Confirm the current EPD covers the selected product, finish and manufacturing route.
  • Calculate transport distances for primary materials.
  • Document material reuse or reclaimed content percentages.

Indicative Health & Indoor Air

low Risk

Use and installation risks depend on the selected product and installer method; follow the current Duravit instructions.

Evidence:Third-party verified

Specification

Product code
700475000000000
Range
D-Neo
Collection
D-Neo
Finish
White Glossy
Service life
30 years

Cookies — essential ones keep the site working; optional analytics help us improve it. No advertising cookies.