Dulux Trade Vinyl Matt

Trade matt emulsion for interior walls and ceilings, and the highest-volume product on the Dulux Trade contract range. Its declaration is one of the 2024 MRPI vintage, which is declared per single coat.

Manufacturer page
Dulux Trade Dulux Trade Vinyl Matt

Carbon and evidence

Product Evidence

Evidence currently held for the Dulux Trade product record.

Dulux Trade

Recorded Carbon Result

0.161kgCO₂e/m²

A1–A3 GWP-total per 1 m² of substrate at ONE coat as declared in 1.1.00527.2024. Coat count differs between brands on this shelf and must be checked before any comparison.

Indicator: GWP-total

Dulux Trade Vinyl Matt Environmental Product Declaration · MRPI 1.1.00527.2024, p. 6, Environment impact per declared unit (core indicators A2), GWP-total row, A1-A3 column

A1–A3 covers raw-material supply, transport to manufacture and manufacturing. It is product-stage information, not a whole-life result.

Environmental Product Declaration

EPD recorded
Coverage
Specific product
Declared unit
1 m² of substrate, one coat
Programme
Stichting MRPI (MRPI®, Netherlands)
Registration
1.1.00527.2024
Standard
EN 15804+A2
Valid until
2029-04-05
Verification
Third-party verified
Read the EPDSource: MRPI 1.1.00527.2024, p. 6, Environment impact per declared unit (core indicators A2), GWP-total row, A1-A3 column

Carbon profile

kgCO2e per 1 m² of substrate, one coat · each bar starts at zero · local scale

A1-A3 product

0.161

A4-A5 site*

0.013

B use

not declared

—

C end of life

0.0256

D reuse / recycling

-0.00367

adds carbon stores or removes EPD scenario* reuse/recycling potential (D)
* EPD transport and installation scenario, not this project's. Not declared: use. Module D shows potential impacts or benefits from reuse, recovery or recycling after the product's assessed life. It is reported separately and never added to A-C. Do not compare bar lengths between materials. Each chart may use a different scale and declared unit.

Reported GWP Modules

Displayed as stored; modules are not added together here.

A1–A3

0.161 kgCO₂e

per 1 m² of substrate, one coat

A4*

0.0031 kgCO₂e

per 1 m² of substrate, one coat

A5*

0.00987 kgCO₂e

per 1 m² of substrate, one coat

C2

<0.001 kgCO₂e

per 1 m² of substrate, one coat

C4

0.0249 kgCO₂e

per 1 m² of substrate, one coat

D

-0.00367 kgCO₂e

per 1 m² of substrate, one coat

* A4/A5 are EPD scenarios, not project-specific results. Module D is outside the A–C system boundary and is not added to A–C. Module nomenclature follows BS EN 15978 / EN 15804. Declared values are suitable as inputs to a whole life carbon assessment under the RICS Professional Standard (2nd edition); this panel is not an assessment.

Upfront Carbon (A1–A5)*

0.174 kgCO₂e per 1 m² of substrate, one coat

A1–A3 0.161 + A4 0.0031 + A5 0.00987 · GWP-total, as declared

* Includes the EPD’s A4/A5 scenario assumptions, not project-specific transport or installation. This is the aggregation the proposed Part Z applies upfront limits to. The A1–A3 figure includes declared biogenic storage of -0.00479 kgCO₂e; Part Z aggregates upfront carbon excluding sequestered carbon, which is the assessor's adjustment to make.

Sourced Product Claims

  • Third-party verified EPD, Stichting MRPI (1.1.00527.2024)Third-party verifiedSource
  • Declared over ONE coat — check the coat count before comparing with another paintThird-party verifiedSource

Evidence Sources

Dulux Trade Vinyl Matt Environmental Product Declaration

Stichting MRPI (MRPI®, Netherlands) · MRPI 1.1.00527.2024, p. 6, Environment impact per declared unit (core indicators A2), GWP-total row, A1-A3 column

Coverage: Dulux Trade Vinyl Matt, declared over one coat.

Third-party verified

Comparison Status

The record contains the basic metadata required for a controlled comparison. Products must still perform the same function and use compatible units, PCRs and lifecycle scope.

Design & Specification Notes

Qualitative notes for early design discussion. Not product-specific EPD evidence, and not a basis for numerical comparison.

Trade matt emulsion for interior walls and ceilings, and the highest-volume product on the Dulux Trade contract range.

Typical Uses

  • •Interior wall finish
  • •Feature surfaces
  • •General fit-out

Key Performance

Durable surface for daily wear.

Specification Actions

  • •Confirm the current EPD covers the selected product, finish and manufacturing route.
  • •Calculate transport distances for primary materials.
  • •Document material reuse or reclaimed content percentages.

Indicative Health & Indoor Air

low Risk
Evidence:Third-party verified

Specification

Range
Vinyl Matt
Finish
Matt emulsion for interior walls and ceilings

Cookies — essential ones keep the site working; optional analytics help us improve it. No advertising cookies.