Crown Trade Matt Vinyl Emulsion

Name: Crown Trade Matt Vinyl Emulsion
Brand: Crown Paints

Contract matt emulsion for interior walls and ceilings. The declaration is a volume-weighted average across nine shades and five pack sizes, and is declared per single coat.

Manufacturer page

Carbon and evidence

Product Evidence

Evidence currently held for the Crown Paints product record.

Crown Paints

Recorded Carbon Result

0.0983kgCO₂e/m²

A1–A3 GWP-total per 1 m² of substrate at ONE coat as declared in BREG EN EPD 000435. Coat count differs between brands on this shelf and must be checked before any comparison.

Indicator: GWP-total

Crown Trade Matt Vinyl Emulsion Environmental Product Declaration · BREG EN EPD 000435, LCA Results, Parameters describing environmental impacts, GWP-total row, A1-3

A1–A3 covers raw-material supply, transport to manufacture and manufacturing. It is product-stage information, not a whole-life result.

Environmental Product Declaration

EPD recorded

Coverage: Coverage not confirmed
Declared unit: 1 m² of substrate, one coat
Programme: BRE Global (BRE Environmental Profiles / GreenBookLive), ECO Platform verified
Registration: BREG EN EPD 000435
Standard: EN 15804:2012+A2:2019
Valid until: 2027-10-13
Verification: Third-party verified

Product Average across 9 shades and 5 pack sizes, volume-weighted, as stated in the declaration.

Read the EPDSource: BREG EN EPD 000435, LCA Results, Parameters describing environmental impacts, GWP-total row, A1-3

Carbon profile

kgCO2e per 1 m² of substrate, one coat · each bar starts at zero · local scale

A1-A3 product

0.0983

A4-A5 site*

0.0198

B use

not declared

—

C end of life

not declared

—

D reuse / recycling

not declared

—

adds carbon stores or removes EPD scenario* reuse/recycling potential (D)

* EPD transport and installation scenario, not this project's. Not declared: use, end of life, reuse / recycling. Do not compare bar lengths between materials. Each chart may use a different scale and declared unit.

Reported GWP Modules

Displayed as stored; modules are not added together here.

A1–A3

0.0983 kgCO₂e

per 1 m² of substrate, one coat

A4*

0.00432 kgCO₂e

per 1 m² of substrate, one coat

A5*

0.0155 kgCO₂e

per 1 m² of substrate, one coat

* A4/A5 are EPD scenarios, not project-specific results. Module nomenclature follows BS EN 15978 / EN 15804. Declared values are suitable as inputs to a whole life carbon assessment under the RICS Professional Standard (2nd edition); this panel is not an assessment.

Upfront Carbon (A1–A5)*

0.118 kgCO₂e per 1 m² of substrate, one coat

A1–A3 0.0983 + A4 0.00432 + A5 0.0155 · GWP-total, as declared

* Includes the EPD’s A4/A5 scenario assumptions, not project-specific transport or installation. This is the aggregation the proposed Part Z applies upfront limits to. The A1–A3 figure includes declared biogenic storage of <0.001 kgCO₂e; Part Z aggregates upfront carbon excluding sequestered carbon, which is the assessor's adjustment to make.

Sourced Product Claims

Third-party verified EPD, BRE Global (BREG EN EPD 000435)Third-party verifiedSource
Declared over ONE coat — check the coat count before comparing with another paintThird-party verifiedSource

Evidence Sources

Crown Trade Matt Vinyl Emulsion Environmental Product Declaration

BRE Global (BRE Environmental Profiles / GreenBookLive), ECO Platform verified · BREG EN EPD 000435, LCA Results, Parameters describing environmental impacts, GWP-total row, A1-3

Coverage: Product Average across 9 shades and 5 pack sizes, volume-weighted, as stated in the declaration.

Third-party verified

Comparison Status

This result should be displayed for information only and not ranked against another product.

• The represented product coverage is unknown.

Evidence Gaps

•EPD product coverage is not confirmed.

Design & Specification Notes

Qualitative notes for early design discussion. Not product-specific EPD evidence, and not a basis for numerical comparison.

Contract matt emulsion for interior walls and ceilings.

Typical Uses

•Interior wall finish
•Feature surfaces
•General fit-out

Key Performance

Durable surface for daily wear.

Specification Actions

•Confirm the current EPD covers the selected product, finish and manufacturing route.
•Calculate transport distances for primary materials.
•Document material reuse or reclaimed content percentages.

Indicative Health & Indoor Air

low Risk

Evidence:Third-party verified

Specification

Range: Matt Vinyl Emulsion
Finish: Matt emulsion for interior walls and ceilings