Armourcoat Clime Clay Lime Plaster

A trowel-applied decorative plaster of natural clay and lime for internal walls, supplied in coarse and honed finishes. Vapour-open and free of synthetic binders, giving a soft, mineral surface that takes natural pigment.

Manufacturer page
Armourcoat Armourcoat Clime Clay Lime Plaster

Carbon and evidence

Product Evidence

Evidence currently held for the Armourcoat product record.

Armourcoat

Recorded Carbon Result

0.215kgCO₂e/kg

A1–A3 GWP-total per kg of packaged plaster. The EPD gives an installed equivalent of 0.47–0.7 kgCO2e/m². From a declaration that expired on 23 July 2026.

Indicator: GWP-total

A1–A3 covers raw-material supply, transport to manufacture and manufacturing. It is product-stage information, not a whole-life result.

Historical result from an expired EPD. It is retained for transparency, but it must not be used for product comparison until a valid replacement is recorded.

Environmental Product Declaration

EPD expired
Coverage
Product family
Declared unit
1 kg packaged product
Programme
EPD International AB (The International EPD® System)
Registration
S-P-04001
Standard
EN 15804+A2 and ISO 14025 / ISO 21930
Valid until
2026-07-23 · expired
Verification
Third-party verified

This declaration expired on 23 July 2026. It was third-party verified when issued; because it has lapsed, the evidence level here is recorded as published-source rather than verified. The figure will be updated if a reissued declaration is published.

Read the EPDSource: PDF "Results for 1kg of Clime", core indicators table — GWP-total A1–A3 = 2.15E-1 kg CO2e.

Carbon profile

kgCO2e per 1 kg of packaged Clime plaster · each bar starts at zero · local scale

A1-A3 product

0.215

A4-A5 site*

-0.0036

B use

not declared

—

C end of life

0.0152

D reuse / recycling

not declared

—

adds carbon stores or removes EPD scenario* reuse/recycling potential (D)
* EPD transport and installation scenario, not this project's. Not declared: use, reuse / recycling. Do not compare bar lengths between materials. Each chart may use a different scale and declared unit.

Reported GWP Modules

Displayed as stored; modules are not added together here.

A1–A3

0.215 kgCO₂e

per 1 kg of packaged Clime plaster

A4*

0.0167 kgCO₂e

per 1 kg of packaged Clime plaster

A5*

-0.0203 kgCO₂e

per 1 kg of packaged Clime plaster

C2

0.00834 kgCO₂e

per 1 kg of packaged Clime plaster

C4

0.00688 kgCO₂e

per 1 kg of packaged Clime plaster

* A4/A5 are EPD scenarios, not project-specific results. Module nomenclature follows BS EN 15978 / EN 15804. Declared values are suitable as inputs to a whole life carbon assessment under the RICS Professional Standard (2nd edition); this panel is not an assessment.

Upfront Carbon (A1–A5)*

0.211 kgCO₂e per 1 kg of packaged Clime plaster

A1–A3 0.215 + A4 0.0167 + A5 -0.0203 · GWP-total, as declared

* Includes the EPD’s A4/A5 scenario assumptions, not project-specific transport or installation. This is the aggregation the proposed Part Z applies upfront limits to. The A1–A3 figure includes declared biogenic storage of -0.00762 kgCO₂e; Part Z aggregates upfront carbon excluding sequestered carbon, which is the assessor's adjustment to make.

Service Life — the B4 Replacement Input

30 years · basis not recorded

≈2 installations over a 60-year building study period.

B4 (replacement) follows the building, not the product: an assessor multiplies replacement cycles by project quantities. This record supplies the service life and does not compute B4.

Sourced Product Claims

  • EPD expired 23 July 2026 — check for reissuePublished sourceSource
  • Natural clay and lime, no synthetic binderManufacturer declaredSource

Evidence Sources

Armourcoat Clay Lime Plaster (Clime) EPD (S-P-04001)

EPD International AB

Coverage: Clime coarse and honed clay lime plaster

Published source

Comparison Status

This result should be displayed for information only and not ranked against another product.

  • • The PCR and version are missing.
  • • The EPD is expired.
  • • The carbon result is not linked to an evidence source.
  • • The EPD is not linked to an evidence source.

Evidence Gaps

  • •The recorded EPD is expired and is retained as historical evidence only.

Design & Specification Notes

Qualitative notes for early design discussion. Not product-specific EPD evidence, and not a basis for numerical comparison.

A trowel-applied decorative plaster of natural clay and lime for internal walls, supplied in coarse and honed finishes.

Typical Uses

  • •Interior wall finish
  • •Feature surfaces
  • •General fit-out

Key Performance

Durable surface for daily wear.

Specification Actions

  • •Confirm the current EPD covers the selected product, finish and manufacturing route.
  • •Calculate transport distances for primary materials.
  • •Document material reuse or reclaimed content percentages.

Indicative Health & Indoor Air

low Risk
Evidence:Published source

Specification

Collection
Armourcoat Raw Earth / Clime
Finish
Clay and lime decorative plaster, coarse or honed
Service life
30 years

Cookies — essential ones keep the site working; optional analytics help us improve it. No advertising cookies.